Whether you're seeking mailbox refurbishment in Tampa Bay after a
storm, or simply looking to spruce up the family front lawn, installing a post
mounted mailbox on your own can offer plenty of difficulty. Often, the job
requires some concrete work and the use of specific tools that aren't always
found in the common garage. If you insist on handling the task on your own,
this article should offer plenty of tips of how to get it done properly.
Keep in mind that your mailbox should have the following specs if you
want to ensure the best setup possible: a body made of cast aluminum with
accompanying stainless steel hardware, an attractive design with a powder
coated finish, a sturdy aluminum post, matching signs that alert deliveries to
your specific house number and address, and locking door options to keep your
mail safely intact.
As for the setup of your mailbox, follow these four easy steps:
Step 2- Securing your post: After you place the post in the hole, be
sure to level it and attach two support beams at the center to keep the post
standing up straight; place one at the side of the post, and then add another
to the back for proper support. This will ensure that the post does not move
while you are pouring the concrete. Additionally, this will help keep
everything level while the concrete is drying.
Step 3- Adding concrete for support:
Pour dry concrete straight into the hole leaving 3 to 4 inches of space from
the top open. Typically, a 50-pound bag of quick-dry concrete should do the
trick here just fine. Next, you will have to saturate the concrete, and experts
recommend using about a gallon of water per 50-pound bag used. Remember to
leave your support beams in place for 4 to 6 hours or until you are certain the
concrete is dry.
Step 4- Attaching and finalizing your mailbox: Typically, most mailbox
installation kits come with a wood anchor to attach to the post. After screwing
the anchor to the post, slide the mailbox over this anchor and secure it with
galvanized screws. You're done!
When it comes to the refurbishing of existing mailboxes,
typically, expert assistance is recommended. If there is a pre-existing cement
base on your property, you are going to have to fully remove it prior to
preparing your new post set up. Typically, homeowners don't have the necessary
equipment (such as a jackhammer) to properly remove excess concrete, damaged
posts, dinged up boxes, etc. It is also extremely important to install a
temporary box in place of the one being refurbished, so that your mail service
is not interrupted in any way.
Whether you are adding a custom mailbox to your new home or are in need of mailbox refurbishment inTampa Bay, following this quick guide on how to install a new postal box on
your property can make things much easier. Remember to always consider using
expert help for the tasks that require concrete work, and to utilize the ideal
specs mentioned above, which your new mailbox should feature.
